Torque Plugin for Perodua cars

This is a Torque plugin for Malaysian made Perodua cars, particularly older cars which does not support generic OBD protocols. Read real time data, read error codes.!! (note that this version is limited to 1.3 litre engines, future updates will cover 1.5litre engines soon.!)

This is the free version with limited sensors/parameters and features. More parameters (a lot more..!) and features are available in the paid version, soon to be released. Make sure you watch this space...!

In the meantime try this free version and please revert to me for issues. My email address as below.

Prerequisite:

1. This is a Torque plugin. You need to get Torque installed in your device. This plugin will NOT work alone. Also, make sure you use later versions of Torque. Torque with too old version would not be supported.

2. You need ELM327 compliant adapter. Make sure you do not use ELM327 version 2.1 which does not support k-line communications. Get adapters confirmed to work from me or from ahmad hamidon (you can get it from http://bit.ly/obd2malaysia ).

3. Please also make sure you follow the instruction below. And make sure connection to ECU is OK before scan error, erase error or check the status to avoid app crashes.

Important notes..!

Later versions of android, for saving battery life, there is phone setting to stop apps from starting automatically. Please ensure you have set this plugin to autostart. The same thing will need to be done if you have autostart manager in your device.

Typically, the settings are in battery settings of the device.

Installation procedures:

New vehicles with new engine such as Axia does not require any setup. Vehicles with older engines are supported by this plugin and requires special setup as below:

1. This plugin requires full access to OBD device. Check the 'Allow plugin full access' in Settings --> Plugins

2. For 1.3 litre engines or smaler, create a new vehicle profile in Torque. Under Menu, select 'Vehicle Profile'. then click 'create new profile'...,

3. Name the profile 'PERODUA1.3'. Scroll to the bottom and click 'Show advance settings'

4. Scroll to the bottom. For 1.3 litre engines, in 'Preferred OBD Protocol' select 'ISO 14230(fast init,10.4baud)'

5. Click 'Save'"

6. For 1.5 litre engines, it is under testing and not yet supported in this published version, it will be soon..! Watch this space..!

7. Create another vehicle profile and name it 'Blank' scroll to the bottom and 'Save'. Do not put any advanced settings

8. Select the correct Perodua vehicle profile you created earlier everytime you want scan by tapping on Menu --> 'Vehicle Profile'-->select the ones that you created. For other vehicles, use the 'Blank' profile.

9. Create custom PIDs from Settings --> Manage extra PID/Sensors --> tap settings and select 'Add predefined set'. Select 'Perodua PIDs

10. Create displays in 'Realtime Information' by tapping Realtime Information --> go to empty page -->tap menu --> Add display -->pick your meter type --> Select PIDs that start with {PERODUA}.

11. Make sure you go to this page every time you want to use Perodua cars. Otherwise, Torque wouldn't connect to your ECU. You may need to wait for a while at this page for Torque to connect to your car

12. Now you are ready to use the Torque for scanning your car.

这是马来西亚第二国产车制造的汽车，特别是旧车不支持通用OBD协议的一个扭矩插件。读取实时数据，读取错误代码。！ （注意，这个版本被限制到1.3升发动机，未来的更新将很快覆盖1.5litre引擎。！）

这是免费版本具有有限的传感器/参数和特征。更多参数（多了很多..！）和功能都在付费版本，很快就被释放。确保你看这个空间...！

在此期间试试这个免费版本，并请回到我的问题。下面我的电子邮件地址。

先决条件：

1.这是一个扭矩插件。你需要得到设备中安装扭矩。这个插件将不会单独工作。此外，请确保您使用的扭矩更高版本。扭矩与太旧版本将不支持。

2.您需要ELM327兼容适配器。请确保您不使用ELM327 2.1版不支持K线通信。获取适配器证实来自我或者从哈米顿·艾哈迈德工作（你可以从http://bit.ly/obd2malaysia得到它）。

3.也请务必遵循以下指导操作。做出ECU确保连接正常扫描错误之前，擦除错误或检查状态，以避免应用程序崩溃。

重要笔记..！

机器人的后续版本，为延长电池寿命，有手机设置来自动启动停止的应用程序。请确保你已经设置这个插件自动启动。同样的事情都需要，如果你有自动启动管理器在您的设备来完成。

典型地，设置在该装置的电池设置。

安装步骤：

新引擎的新车，如阿夏不需要任何设置。与旧发动机的车辆在此插件支持，需要特殊设置如下：

1.此插件需要全面进入OBD装置。选中“允许插件完全接入”在设置 - >插件

2. 1.3升发动机或smaler，创建在转矩一个新的交通工具简档。在菜单中，选择“车辆基本”。然后单击“创建新的配置文件” ......，

3.命名配置文件“PERODUA1.3”。滚动至底部，并点击“显示高级设置”

4.滚动至底部。 1.3升发动机，在“优选OBD协议”选择“ISO 14230（快速初始化，10.4baud）”

5.单击“保存””

6. 1.5升发动机，它正在测试并在此发布的版本还不支持，它会很快..！关注此空间..！

7.创建另一个车辆轮廓并将其命名为“空白”滚动至底部，并“保存”。不要把任何高级设置

8.选择先前创建的正确国产车车辆基本每次你想通过点击菜单扫描 - >“车辆配置文件” - >选择您所创建的那些。对于其他车辆，使用“空白”配置文件。

9.创建从设置自定义的PID - >管理额外的PID /传感器 - >点击设置，并选择“添加组预定义”。选择“国产车的PID

10.通过点击实时信息创建“实时信息”显示 - >去空白页 - >点击菜单 - >添加显示 - >选择你的仪表类型 - >与第二国产车{}开始选择的PID。

11.确保你去这个页面要使用国产车的汽车的每一次。否则，扭矩也不会连接到您的ECU。您可能需要等待一段时间，在此页面扭矩连接到你的车

12.现在你已经准备好使用的扭矩用于扫描你的车。